This bathroom heater fan is a compact, high-performance 3-in-1 unit engineered to deliver targeted heating, efficient ventilation, and versatile illumination for residential bathroom applications. Constructed with a white polypropylene housing and polycarbonate faceplate, the fitting is designed to withstand moist environments with an IPX4 weather-resistant rating. Its flush-mounted configuration and low-profile silhouette allow seamless integration into small to medium bathroom spaces without compromising functionality or aesthetics.
The lighting system incorporates a fixed tricolour R80 LED lamp with selectable colour temperatures of 3000K (warm white), 4000K (cool white), and 5000K (daylight white), delivering up to 1200 lumens depending on the setting. The heating function is powered by two 275W infrared heat lamps, providing immediate and focused warmth. Ventilation is handled by a 35W exhaust fan equipped with a high-performance ball bearing motor, producing an airflow of 360m³/hr while maintaining a quiet operation below 40 decibels. Independent control of the light, heat, and fan functions is enabled via the supplied 3-gang wall switch.
The unit is designed for ceiling mounting and requires a cutout of 375mm x 202mm with a minimum cavity depth of 200mm. Its external dimensions measure 419mm in width, 244mm in length, and 264mm in height. A 125mm duct connection facilitates effective air discharge, and the included 1.5-metre ducting, external grille, and two mounting clips provide a complete ventilation solution. Thermal overload protection and a built-in back draft stopper ensure operational safety and backflow prevention, while a cut-out template is included to assist with installation.
All components are included to support a straightforward installation by a licensed electrician, which is a requirement to validate the two-year in-home warranty. The Striker 2 combines reliability, efficiency, and customisable lighting with quiet yet powerful ventilation, making it a comprehensive and dependable fixture for year-round bathroom comfort and functionality.
COLOUR: White
MATERIAL: Polypropylene (housing), polycarbonate (faceplate)
IP RATING: IPX4
GLOBE: LED (includes fixed LED chips in fitting)
COLOUR TEMP: 3000K (warm white), 4000K (cool white), 5000K (daylight white)
LUMENS: 1100lm (3000K), 1200lm (4000K), 1100lm (5000K)
WATTAGE: 2 x 275W (heating), 12W (LED light), 35W (fan)
VOLTAGE: 220–240V 50Hz
DIMENSIONS: 419mm (width) x 244mm (length) x 264mm (height)
CUTOUT: 375mm x 202mm
MINIMUM CEILING DEPTH: 200mm
DUCTING SIZE: 125mm
DECIBEL RATING: ≤40dB
AIRFLOW: 360m³/hr
MOTOR: High performance ball bearing motor
MOUNTING: Ceiling mounted
CAPABILITIES: Independent control of heat, light and fan
APPLICATIONS: Bathrooms (heating, lighting and ventilation)
FEATURES: Low profile design for small to medium bathrooms; thermal overload protection; back draft stopper; cut-out template
INCLUDES: 1 x 1.5m duct, 2 x clips for ducting, 1 x external grille, 1 x 3 gang switch wall controller, 2 x heat lamps, 1 x tricolour R80 LED lamp
INSTALLATION: Must be installed by licensed electrician
WARRANTY: 2 year in-home warranty (void unless installed by licensed electrician)
