This LED strip light is supplied in a continuous 5m length, delivering powerful and uniform illumination with a dotless finish. Powered by 24V DC, it provides efficient and stable operation across the entire length. Using COB technology with 640 LEDs per metre, the strip achieves seamless lighting without visible points. At 15W per metre, it produces 1500lm in neutral white 4000K, offering bright, balanced illumination suitable for general and task lighting.
Featuring a 180° beam angle, the strip ensures full light coverage, while its CRI of ≥90 enhances colour accuracy and visual performance. It is dimmable when paired with a suitable driver, allowing brightness adjustment for different environments. With 25mm cutting increments, the strip offers customisation flexibility during installation, making it adaptable to a variety of design requirements.
Rated for 50,000 hours of use, this LED strip is built for long-term durability and low maintenance. It supports continuous operation of 5m from one end or up to 10m with two-end driver feeding, making it suitable for projects of varying sizes. It performs reliably between -20°C and 50°C, with safe storage from -30°C to 80°C. Photometric data is available upon request to assist with lighting design and compliance.
With an IP54 rating, the strip is weather-resistant and suitable for indoor wet areas such as kitchens and bathrooms. Installation on an aluminium heat sink is required for proper thermal management and to maintain warranty conditions. Supplied in a 5m length, it is supported by a 3+2 year replacement warranty, ensuring a high-quality and dependable lighting solution.
LENGTH: 5000mm
IP RATING: IP54 (weather-resistant)
VOLTAGE: 24V DC
LED WATTAGE: 15W (per metre)
LED TYPE: COB (640 LEDs per metre)
GLOBE: LED (includes fixed LED chips in fitting)
COLOUR TEMP: 4000K (cool white)
LUMENS: 1500lm (per metre)
CRI: ≥90
BEAM ANGLE: 180°
DIMMABLE: Yes
LIFE SPAN: 50,000 hours
WIRING: Parallel
CUTTING INCREMENT: 25mm
CONTINUOUS RUN: 5000mm (one end driver feed), 10000mm (two end driver feed)
AMBIENT TEMP: -20°C to 50°C
STORAGE TEMP: -30°C to 80°C
DRIVER: Requires 24V DC constant voltage LED driver (not included)
INSTALLATION: Requires installation on aluminium heat sink (failure to do so will void warranty)
APPLICATIONS: Indoor use only - suitable for indoor wet areas
PHOTOMETRIC DATA: Available upon request
WARRANTY: 3+2 years (replacement)
