This remote control solar street light is perfect for sidewalks, paths and all outdoor environments. You can select between power saving standby with motion sensor, or full power mode. Applications include pathways, perimeters, parking lots and other places where mains power is not viable.

There are three modes:
1. Power saving mode: offers lighting of up to 4 nights on one full charge, even during overcast and rainy conditions. In this mode the light will provide 150 lumens ambient illumination, increasing to 500 lumens when a pedestrian or car movement activates the motion sensor. The sensor triggers the bright light for 30 seconds, up to 50 times each night. 
2. Full power mode at 1000 lumens: one hour at 1000 lumens and after this time, the light goes to power saving mode.
3. Full power mode at 500 lumens: two hours at 500 lumens and after this time, the light goes to power saving mode.

Installation is easy on either poles or walls.

This solar street light comes complete - including solar light, solar panel, rechargeable batteries, brackets, all installation accessories etc. The light does not include a pole, but if you need one, please contact us for more information.

TYPE: Solar Street Light - Commercial Grade  
WARRANTY: 2 years 
IP RATING: IP65 (completely weatherproof)
MATERIAL: Cast aluminium alloy and PC housing
LIGHT AT NIGHT: 1 night (full power modes 1 and 2) to 4 nights (power saving mode)
MOTION SENSOR: Yes (PIR - passive infra red)
LUMENS: Up to 1000lm
WATTAGE: 10W LED array / 6.8W solar panel
GLOBE TYPE: LED Array
LIGHTING AREA: 12m²
DIMENSIONS: 450mm x 246mm x 86mm
BATTERY: Fast charging 3,7V Lithium rechargeable replaceable 
WEIGHT: 4kg
CHARGE TIME: 9-10 hours
LIFE TIME: Solar panel 15 year lifespan, battery 3–5 years, LEDs 50,000 hours (approx 15 years)
WORKING TEMP: -25°C to +65°C
BEAM ANGLE: 140°
INSTALLATION: Recommended 2.5m to 3.5m
POLE: Requires pole with diameter between 40mm and 63mm