This solar sign wall light is engineered to provide targeted, energy-efficient illumination for signage, entry points and architectural features. Constructed from durable polystyrene (PS) and ABS in a dark grey finish, the slim-profile fitting integrates fixed LED chips delivering up to 1000lm at 4000K (cool white). The neutral colour temperature ensures clear visibility and accurate surface illumination, making it particularly suitable for highlighting house numbers, signage panels and access points. With an IP54 rating, the luminaire offers reliable protection against dust ingress and water splashes, ensuring consistent outdoor performance in varied weather conditions.
The integrated 4.86V 1.5W monocrystalline silicon solar panel efficiently converts sunlight into stored electrical energy, supplying the built-in 3.7V 7.4WH Li-ion battery. A full charge is achieved in approximately 7 hours under direct sunlight, enabling 7+ nights of autonomous operation depending on environmental conditions and selected mode. Designed to charge even on cloudy days, the system maintains dependable energy harvesting to support long-term, self-sufficient operation without reliance on mains power.
A built-in PIR motion and proximity sensor enhances both energy efficiency and security performance by dynamically adjusting output in response to detected movement. Four selectable lighting modes provide adaptable functionality: 25% brightness from dusk until dawn; 10% brightness from dusk until dawn with 30 seconds of 100% brightness upon motion detection; 0% standby output with 30 seconds of 100% brightness when activated; or continuous 100% brightness from dusk until dawn. This programmable configuration allows the fitting to be optimised for security emphasis, energy conservation or constant illumination depending on site requirements.
Measuring 283.5mm in width, 50mm in height and 62.3mm in projection, and weighing just 0.31kg, the compact linear form enables streamlined surface mounting at an optimal height of 3m. The luminaire is well suited for installation on outside walls, gateway entrances and exits, columns, fences, above signs or house numbers, and over mailboxes. Backed by a 1 year warranty including the battery, this solar sign wall light provides a practical, low-maintenance and environmentally responsible lighting solution designed for reliable outdoor performance.
COLOUR: Dark grey
MATERIAL: Polystyrene (PS) and ABS
MOTION SENSOR: Yes (PIR motion/proximity sensor)
DIMENSIONS: 283.5mm (width) x 50mm (height) x 62.3mm (projection)
WEIGHT: 0.31kg
IP RATING: IP54 (weather-resistant)
GLOBE: LED (includes fixed LED chips in fitting)
COLOUR TEMP: 4000K (cool white)
LUMENS: 1000lm
SOLAR PANEL: 4.86V 1.5W monocrystalline silicon
BATTERY: Li-ion 3.7V 7.4WH
CHARGING TIME: 7 hours (by direct sunlight)
AUTONOMY: 7+ nights
LIGHTING MODE 1: 25% brightness from dusk until dawn
LIGHTING MODE 2: 10% brightness from dusk until dawn with 30 seconds 100% brightness PIR activated light
LIGHTING MODE 3: 0% brightness from dusk until dawn with 30 seconds 100% brightness PIR activated light
LIGHTING MODE 4: 100% brightness from dusk until dawn
INSTALLATION: Optimal mounting height of 3m
CLOUDY DAYS: Designed to charge even on cloudy days
APPLICATIONS: Outside walls, gateway entrance/exit, columns, fences, over signs/numbers, over mailboxes
WARRANTY: 1 year (battery included)
