This is a superb RGB 10m solar fairy light kit with 100 LEDs. The cord is attached to an external solar panel and a battery pack which gets charged during the day and supports over 8 hours of lighting at night.
This kit is water resistant with an IP65 IP rating. It is ideal for all outdoor decorations and uses. The 10m length gives you complete flexibility if you want to curve it around objects or frames. This is an ideal lighting option for trees, columns, beams, rails, fences, window frames, exterior features and garden sculptures as well as areas around pools, patios, balconies, gazebos, outdoor staircases and rails.
This DIY light is totally green and environmentally friendly. It charges completely by solar energy and does not need a connection to the main power. Everything you need is included, you do not need anything else.
Applications
- Outdoor and garden decorations
- Window frame and fence decorations
- Tree and plant decorations
- Balcony and patio decorations
- Beams and columns
- Yacht and boat decorations
- Wedding and party decorations
- Christmas and festive season decorations
- Water fountain and garden feature decoration, and much more
Features
- 100 LEDs on a 10-meter long cord
- Weather and water resistance with IP65 rating
- Over 8 hours of lighting per night
- Green and safe with no electricity usage
- 100% customer satisfaction with 12-months warranty
Specifications
- Cord: 10m
- LED: 100 x Epistar RGB (Red, Green, Blue) LEDs
- Solar Panel: 2V, 170mA
- Battery: AA Ni-MH 1.2V 600mAh
- 6 lighting modes: constant lighting, fade, flash, smooth, SOS and strobe
- Charging Method: Solar Power
- Charging time: 6-8 hours
- Lighting time: Over 8 hours
- Material: High-quality ABS
- Work temperature: -25c to 65c
- Waterproof: Yes- IP65
- Warranty: 12 months
Useful Information
- The Solar Fairy Light is waterproof (IP65) and can be used outdoors, including in wet areas.
- No electrical wiring required. very easy to install and operate.
- No risk of fire and electrocution. Completely safe for kids and pets.
- 6 lighting modes: steady on and flashing modes.
How to Install
- Before using the solar fairy light for the first time, leave the solar panel under direct sunlight for about 6 hours.
- It is important to put the solar panel in a location that receives full sunlight each day. Shady locations will not allow the battery to be fully charged and will reduce the hours of lighting.
- For installation, attach the ground stake to the bottom of the pole, then slide the solar panel box into the top of the pole. Press the ON/OFF switch to turn on the light. Press the Mode switch to change the flashing style.