This solar bollard light is engineered to provide reliable low-voltage outdoor illumination for defined pathways and landscaped environments, delivering a cool white 4000K output with a measured luminous flux of 500 lumens. The optical system integrates fixed LED chips designed for stable photometric performance and uniform light distribution across the specified lighting area, supporting clear visual guidance along walkways, driveways and perimeter zones. The luminaire is finished in a dark grey tone to complement contemporary exterior settings while maintaining a restrained architectural presence within residential outdoor applications.
The housing assembly is formed from a composite construction of ABS and aluminium, providing a balanced combination of mechanical strength, corrosion resistance and long-term dimensional stability under outdoor exposure. With an ingress protection rating of IP65, the enclosure is fully weatherproof and designed to resist the ingress of dust and water under routine environmental conditions, supporting reliable operation in exposed garden and pathway installations. The structural configuration supports consistent optical alignment and thermal management of the integrated LED light source, contributing to sustained luminous efficacy over extended service life.
Energy autonomy is provided by an integrated monocrystalline silicon photovoltaic module rated at 4.4V and 1.4W, coupled with a high-capacity lithium-ion battery rated at 3.7V and 2000mAh. Under typical solar charging conditions, the internal energy storage system achieves full charge in approximately seven hours, supporting operation for up to three days depending on selected operating mode and available solar input. The luminaire incorporates four programmable lighting modes, enabling graduated output levels of 25%, 50%, 75% or 100% brightness from dusk until dawn to balance illumination performance with extended overnight autonomy.
The luminaire is supplied with a ground spike mounting system to allow direct push-in installation into soil or turf without the requirement for concrete footings or permanent base fixing. This installation method supports flexible placement along pathways, garden beds and landscape perimeters while maintaining stable positioning under normal outdoor conditions. The overall assembly is optimised for low-maintenance operation and long-term reliability, providing a practical and energy-efficient solution for exterior pathway and feature lighting applications with a defined warranty period covering the luminaire and integrated battery system.
COLOUR: Dark Grey
MATERIAL: ABS and aluminium
DIMENSIONS: 560mm (height) x 85mm (width)
IP RATING: IP65 (fully weatherproof)
GLOBE: LED (includes fixed LED chips in fitting)
COLOUR TEMP: 4000K (cool white)
LUMENS: 500lm
SOLAR PANEL: Monocrystalline silicon, 4.4V / 1.4W
BATTERY: Li-ion 3.7V, 7.4Wh, 2000mAh
CHARGING TIME: 7 hours (typical)
AUTONOMY: Up to 3 days autonomy
LIGHTING MODE 1: 25% brightness from dusk until dawn
LIGHTING MODE 2: 50% brightness from dusk until dawn
LIGHTING MODE 3: 75% brightness from dusk until dawn
LIGHTING MODE 4: 100% brightness from dusk until dawn
LIGHTING AREA: Approx. 3.5m²
MOUNT: Ground spike mount (push-in installation)
APPLICATIONS: Pathways, gardens, driveways, walkways and landscape perimeter lighting
WEIGHT: 645g
WARRANTY: 1 year (battery included)
