This solar post light is equipped with a built in solar panel and a storage battery, and constructed from sturdy aluminium alloy and a glass lampshade with a sleek black finish. The light has two brightness settings: an ambient low warm white and a bright white high setting.

Two mode motion activation:

Mode 1 (low brightness): a single LED is triggered by the photo-electric cell at dusk, and remains on for the duration of the night. This provides a pleasant ambience as well as enough light to know where you’re heading.

Mode 2 (high brightness): when the motion sensor detects movement, all remaining LEDs are activated, giving a bright, wide-area bright light for you to see exactly what you’re doing. Once triggered, an electronic timer keeps the full complement of LEDs on for 1 minute, even when you’ve walked out of the motion sensors range – so you won’t be surprised by a sudden loss of light when you might need it most. After a minute, the light returns to Mode 1 until the motion sensor is triggered again and the process is repeated.

The two modes means you can have the solar light operational for the entire night, even if the day was not fully sunny.

TYPE: Solar Post Light
APPLICATIONS: Driveways, Walkways, Gardens, Landscaping, Waterfronts, Pontoons and Jetties, Pool Areas
SOLAR PANEL: Built in 0.6W photo-electric cell 
LED: 19 x SMD LEDs at 0.2W each
BATTERY: 1 x 3.7V 2.2Ah NiMH battery built in (battery is replaceable)
SENSOR TIME: 1 minute sensor run time 
LIGHT: 6-8 hours at night with full charge
SENSOR: Pyro-electric infrared (2 modes)
SENSOR OVERRIDE: Motion detection can be optionally turned off, giving 80% full brightness continuously for up 5 hours
COLOUR TEMP: 3000K (warm white) 
COLOUR: Black
DIFFUSER: Clear glass
HEIGHT: 1870mm (total height)
HEAD: 270mm width x 370mm height
WATTAGE: 3.8W LEDs and 2.4W solar panel
IP RATING: IP44 (dust-proof and weatherproof) 
LUMENS: 200 lumens at 1m distance
MATERIAL: Aluminium (both fitting and mounting base)
WARRANTY: 1 year