Product Name: ALP008 Alum Profile With PMMA Opal Diffuser 1M Polycarbonate 20.8mm Circular
Product Code: 12470

Equipped with a PMMA Opal Diffuser the profile light range has a large variety of shapes and lengths to suit any lighting challenge. Extrusion only, required end caps, light strips and mounting clips sold separately under code VB-ALP-ACC & VBLST. Equipped with a PMMA Opal Diffuser the profile light range has a large variety of shapes and lengths to suit any lighting challenge. Extrusion only, required end caps, light strips and mounting clips sold separately.

TYPE: LED Lighting Accessories
DIAMETER: 21mm
DIFFUSER: Opal
LENGTH: 1000mm
MOUNTING: Wall or Suspended
DATA SHEET: available upon request

Product Name: ALP008 Alum Profile With PMMA Opal Diffuser 1M Polycarbonate 20.8mm Circular
Product Code: 12470
Sales Inquiries: 03 9973 6373
Email Inquiries: service@lightingstyle.com.au

Lighting Style
ABN 97 623 567 868
www.lightingstyle.com.au

This product conforms to AS/NZ electrical standards. Unless marked as DIY, electrical installation must be performed by a licensed electrician. The information in this datasheet has been carefully checked and is believed to be accurate - it is our practice to provide accurate information wherever possible; however, final specifications may vary. Performance data given in this document are provided as a guide for the user in determining suitability and do not constitute a warranty. Actual performance is subject to the Warranty and Limitations of Liability. Lighting Style shall not be responsible for special, indirect, or consequential damages or loss in any way connected with this product. Warranty is subject to the product being properly handled, stored, installed, and maintained.