Solar Bollard Light - Motion Sensor, Bright, Stainless Steel

This solar bollard will run from 10 to 12 hours per night, is equipped with three powerful NiMH batteries, constructed from strong stainless steel and has a IP44 weatherproof rated finish. The bollard has an automatic day and night sensor installed, as well as an infrared sensor for automatic motion detection.

Two mode motion activation:

Mode 1 (low brightness): a single LED is triggered by the photo-electric cell at dusk, and remains on for the duration of the night. This provides a pleasant ambience as well as enough light to know where you’re heading,

Mode 2 (high brightness): when the motion sensor detects movement, all remaining LEDs are activated, giving a bright, wide-area bright light for you to see exactly what you’re doing. Once triggered, an electronic timer keeps the full complement of LEDs on for 1 minute, even when you’ve walked out of the motion sensors range – so you won’t be surprised by a sudden loss of light when you might need it most. After a minute, the light returns to Mode 1 until the motion sensor is triggered again and the process is repeated.

The two modes means you can have the solar light operational for the entire night, even if the day was not fully sunny.

TYPE: Solar bollard light with motion sensor
APPLICATIONS: Driveways, Walkways, Gardens, Landscaping, Waterfronts, Pontoons, Jetties, Pool Areas
SOLAR PANEL: built in 0.6W photo-electric cell 
GLOBE TYPE: LED (13 x SMD 0.2W LEDs) 
BATTERIES: 3 x 800mAh NiMH batteries built in 
SENSOR TIME: 1 minute motion sensor run time 
LIGHT: 12 hours at night with full sunlight  (in winter this will be reduced)
INSTALLATION: bollard comes with two mounts: surface mounting (recommended) and spike
SENSOR: Pyro-electric infrared (2 modes)
COLOUR TEMP: 3000K (warm white) 
COLOUR: Chrome
HEIGHT: 450mm 
DIAMETER: 120mm (post)
HEAD: 135mm 
WATTAGE: 3W
IP RATING: IP44 (dust-proof and weatherproof) 
LUMENS: 325 lumens at 1m distance
MATERIAL: Stainless steel
WARRANTY: 1 year